Om oss

Partnerskap

Arbeidstilsynet

Blogg

|

Ring 48 49 41 94 eller send oss ​​en e-post

Kontakt
TruTool TF 350 LiHD 18V rechargeable battery

, ,

TruTool TF 350 LiHD 18V rechargeable battery

Cordless connecting – fast, economical, and independent

Be om et tilbud

Cordless connecting – fast, economical, and independent

Joining of ventilation ducts is often performed on site at the construction site. With the battery machine, you are not reliant on the power supply and can work conveniently and cordlessly. The TruTool TF 350 LiHD rechargeable battery enables you to join coated or uncoated workpieces with material thicknesses of 0.8 mm to 4 mm. The resulting permanent connections can be performed in a single operation and require no additional connecting elements thereby ensuring maximum cost-effectiveness. The 4.0 Ah / 18V LiHD rechargeable battery also ensures long runtimes.

 

Cordless Alliance System

Cross-manufacturer rechargeable battery system for leading power tool brands. 100% compatibility in the 18-volt class.

Brushless motor

Almost unlimited service life, virtually wear-free and hardly any maintenance required. Battery performance per charge is also increased.

Straight to the point

The connection point is secure and resilient and the joining points are resistant to corrosion.

No fasteners

No screws or rivets are used. This saves money and simplifies handling.

TruTool TF 350 18V LiHD rechargeable battery, dimensional drawing

Cordless Alliance System

This product is part of the Cordless Alliance System. CAS means one battery for everything, 100% compatibility for machines, rechargeable battery packs and rechargers – regardless of manufacturer. The world's most powerful battery system with 30 years of battery expertise from Metabo. Maximum reliability, clear cost benefits and a sound investment.

Battery technology

LiHD rechargeable battery technology means more power, service life and runtime It charges reliably using process-controlled charging and discharging management. By cells being protected by minimal temperature build-up and permanent electronic single cell protection (ESCP), even when used over very long periods. The result: high-quality materials and intelligent battery management combined with brushless motors and power-head technology mean longer runtimes. The rechargeable battery pack's outer rubber coating also provides secure and non-slip stability as well as impact protection.

Technical Data sheet

Receive the technical data of all product versions as a PDF.

Request Technical Data sheet

Joining ducts

Up to three parts can be connected together, even if the sheet thickness varies. For coated sheet metal, mild steel, stainless steel, aluminum, or with intermediate layers such as adhesive and plastic mats.

Joining frame profiles

For joining connection flanges on ventilation and heating ducts.
The following consumables and the corresponding accessories are included in the scope of delivery.

Case (TRUMPF Box 185XL)

1 unit 2883102

Box for small parts (TRUMPF Box 63XS)

1 unit 2882912

Grease gun (filled with "G1")

1 unit 1398728

Allen key DIN 911-6

1 unit 0067865

Allen key DIN 911-3

1 unit 0067830
Find the right consumables and accessories for your machine here.

Tilting arm for punch

1 unit 0128748

Die arm fixed No. 2

1 unit 0118131
Well-suited for sheet thicknesses of 0.06 – 0.08 in. Can be selected with die No. 1, 2, 2+, 3- or 3.

Die arm fixed No. 3-

1 unit 0129764
Well-suited for sheet thicknesses of 0.10 – 0.12 in. Can be selected with die No. 1, 2, 2+, 3- or 3.

LG 12V-36V recharger

For 12V and 18V LiHD rechargeable battery 1 unit (DE/CH) 2569784 1 unit (GB) 2569786 1 unit (USA) 2569785

Stripper for straight sheets

1 unit 1884874

Punching and nibbling oil for aluminum

1000 ml 0125874

Joining station

1 unit 1224803
For quick and easy joining of smaller sheet parts. Well-suited for stationary use.

Die No. 1

1 unit 0111969
Well-suited for sheet thicknesses of 0.03 – 0.06 in. You can choose between five different dies depending on the material thicknesses: 1, 2, 2+, 3- or 3.

Die arm fixed No. 1

1 unit 0118130
Well-suited for sheet thicknesses of 0.03 – 0.06 in. Can be selected with die No. 1, 2, 2+, 3- or 3.

Plate for channels

1 unit 0243189

Tilting arm for die No. 3

1 unit 0128794
Well-suited for sheet thicknesses of 0.122 – 0.137 in. Can be selected with die No. 1, 2, 2+, 3- or 3.

Tilting arm for die No. 3-

1 unit 0129724
Well-suited for sheet thicknesses of 0.10 – 0.12 in. Can be selected with die No. 1, 2, 2+, 3- or 3.

Tilting arm for die No. 2+

1 unit 0129723
Well-suited for sheet thicknesses of 0.08 – 0.1 in. Can be selected with die No. 1, 2, 2+, 3- or 3.

Tilting arm for die No. 2

1 unit 0128793
Well-suited for sheet thicknesses of 0.06 – 0.08 in. Can be selected with die No. 1, 2, 2+, 3- or 3.

Die No. 2

1 unit 0111968
Well-suited for sheet thicknesses of 0.06 – 0.08 in. You can choose between five different dies depending on the material thicknesses: 1, 2, 2+, 3- or 3.

Punching and nibbling oil for steel

500 ml 0103387

Die No. 2+

1 unit 0122272
Well-suited for sheet thicknesses of 0.08 – 0.1 in. You can choose between five different dies depending on the material thicknesses: 1, 2, 2+, 3- or 3.

Punch

Set of 2 1264160

Die No. 3-

1 unit 1884875
Well-suited for sheet thicknesses of 0.10 – 0.12 in. You can choose between five different dies depending on the material thicknesses: 1, 2, 2+, 3- or 3.

18V LiHD 4.0Ah rechargeable battery

1 unit 2598811

Die No. 3

1 unit 0111967
Well-suited for sheet thicknesses of 0.122 – 0.137 in. You can choose between five different dies depending on the material thicknesses: 1, 2, 2+, 3- or 3.

18V starter kit

1x LG 12V-36V recharger / 2x 18V LiHD 4.0 Ah rechargeable battery 1 Set (DE) 2598816 1 set (GB) 2598820 1 Set (USA) 2598818

Plate

1 unit 1884876

Disc spring

1 unit 0030678

Spring element

1 unit 0249303

Die arm fixed No. 2+

1 unit 0129763
Well-suited for sheet thicknesses of 0.08 – 0.1 in. Can be selected with die No. 1, 2, 2+, 3- or 3.

Lubricating grease G1

0.88 oz. 0344969

Die arm fixed No. 3

1 unit 0118132
Well-suited for sheet thicknesses of 0.122 – 0.137 in. Can be selected with die No. 1, 2, 2+, 3- or 3.

Lubricating grease G1

0139440

Turning ring

1 unit 0976671
For hanging up the machine on a balancer. Enables fatigue-free work with maximum movement.

Tilting arm for die No. 1

1 unit 0128792
Well-suited for sheet thicknesses of 0.03 – 0.06 in. Can be selected with die No. 1, 2, 2+, 3- or 3.

Power-Head Technology

The light metal gear head's ingenious design is specially adapted to the low voltage battery technology. Decoupling the motor pinion from the motor minimizes energy loss and ensures even higher performance per battery charge.

Brushless motor

The powerful BL motor generates higher torques than conventional motors, requires less power and generates hardly any heat. This positively affects battery performance and means you get the maximum from every battery charge. A further advantage is the practically limitless service life of a BL motor due to the absence of carbon brushes and therefore no mechanical wear. This means almost wear-free and maintenance-free motors.

Compact and powerful

The 18V rechargeable battery tool has a lightweight design enabling fatigue-free working. The soft grip ensures safe and low-vibration working. All TRUMPF rechargeable battery tools are also available as stand-alone versions, i.e. without rechargeable batteries and recharger. If you already have CAS batteries available, you then have the option to save on resources and cut costs.

Optimal working speed

You can use the speed controller to adjust the working speed to suit the individual cutting task. It is extremely efficient if you work in accordance with the predefined cutting lines or a template. It is also well-suited to frequent processing of radii and stainless steel. The electronic overload protection offers yet another notable benefit.

Straight to the point

With the clinching process, the sheets of metal to be joined are placed on top of each other. Then the tool cuts a strip into the sheets in a combined punching and forming process. A form-fitting and corrosion-resistant connection joins the top and lower sheets as the materials flow into one another. The connection point solidifies resulting in a permanent connection without additional tools or heat.

No fasteners

The rectangular joining point appears as a shallow raised spot. This means that you have no interference contour, such as in the case of edges that you find with screws and rivets. The simple handling means no fasteners are required and the machine is quickly ready for use. The TruTool TF 350 can also be adapted to the desired application quickly and easily. Simply choose the relevant tool.

Er du klar til å jobbe med

TruTool TF 350 LiHD 18V rechargeable battery?

Kontakt oss i dag

Relaterte produkter

, ,

TruTool PN 200 18V LiHD rechargeable battery

Independent and powerful for medium profile depths

Be om et tilbud
Se maskin

,

TruTool N 500

Powerful in four directions

Be om et tilbud
Se maskin

,

TruTool TSC 200

SsPretty powerful

Be om et tilbud
Se maskin

Contact us Today