TruBend Cell 5000

24/7 high performance for demanding production – top productivity for the Smart Factory

Easy programming, fast automated bending: The TruBend Cell 5000 is the perfect solution for all those who value productive and flexible automation, for the widest possible range of parts. The quality remains consistently high. With the newest series of the bending machine TruBend 5000, the bending cell is state of the art, for example in the areas of programming and angle measurement. Select the bending machine and BendMaster according to your individual range of components. You also have maximum freedom in the design of the material flow using conveyor belts and pallet conveyors.

Perfectly programmed

You will love the programming system TecZone Bend – it is extremely fast and easy to use.

Wide range of components

Process small and large parts weighing up to 220 lbs. with the gripper and vacuum gripping technology

Precise angles

First part, perfect part – thanks to ACB Laser and ACB Wireless

Twice as good

BendMaster 60 and BendMaster 150: The right automation solution for every range of parts

Saves time

The automatic gripper change means you always have the right gripper

Simple setup changes

The ToolMaster can change the tool automatically for every new program in just a few seconds.

Carrying capacity of 330 lbs. with the BendMaster (150)

Carrying capacity of 132 lbs. with the BendMaster (60)

Sheet sensor for fine position recognition

Sheet sensors detect the precise position and guarantee that components are recorded reliably. An additional centering station is no longer necessary.

Available in the following models:

TruBend Cell 5130 + BendMaster (60)TruBend Cell 5170 + BendMaster (60)TruBend Cell 5170 + BendMaster (150)TruBend Cell 5230 + BendMaster (60)TruBend Cell 5230 + BendMaster (150)TruBend Cell 5320 + BendMaster (60)TruBend Cell 5320 + BendMaster (150)

Technical Data sheet

Receive the technical data of all product versions as a PDF.

Request Technical Data sheet

TruBend Cell 5000 with mechanical medium multi-gripper

For large parts, TRUMPF offers numerous grippers with vacuum technology, including multiple-circuit suction cups that can be individually controlled and multi-grippers that can be individually adjusted.

TruBend Cell 5000 with mechanical gripper

The mechanical gripper enables the automated bending of small components. Its linear and rotary axis reduce time-consuming regripping. For large parts, TRUMPF offers numerous grippers with vacuum technology, including multiple-circuit suction cups that can be individually controlled and multi-grippers that can be individually adjusted.

Multigripper small on the TruBend Cell 5000

The adjustable multigripper small is suitable for smaller parts. You can adjust it to the component in just a few steps using quick-release fasteners. Thanks to its 180 degree rotation unit, it also saves valuable cycle time when bending boxes.

TecZone Bend

With TecZone Bend you can combine bend programming in the office with shop floor programming at the TruBend bending machine.

Software

The software portfolio from TRUMPF optimizes your entire production process – from the customer query through to delivery of the finished part.

ToolMaster

You can set up your bending machine automatically for each new program with the automatic ToolMaster tool change system, thereby increasing the machine utilization rate.

Multigripper

The adjustable multigripper, part of the latest generation of the TruBend Cell 5000, makes complex gripper construction a thing of the past. You can create your gripper configurator in just a few minutes in the TRUMPF offline programming system. Using the setup plan, the multigripper can be adapted to the component geometry in just a few steps. You benefit from significantly reduced non-productive times and your personnel is available for activities that actually add value.

Gripper changing console

The console enables autonomous gripper changes as well as automatic processing of various orders, all without the need for manual intervention.

Conveyor belt

The conveyor belt removes small parts that cannot be stacked.

Pallet conveyor

The pallet conveyor loads blanks or unloads finished workpieces without interrupting the bending operation.

Small parts package

The small parts package consists of a sheet removal station and gripper. The sheet removal station separates and produces components – and does so parallel to production in a single operation. The pivoting-jaw gripper enables the automated bending of small components. Its linear and rotary axes reduce time-consuming regripping.

Interface for automated guided vehicle systems

The interface for connected material flow uses an automated guided vehicle (AGV) to automatically load and unload the bending cell without a direct storage connection being required. The transport orders are commissioned via the Oseon software solution and can be executed manually or automatically.

ACB Wireless and ACB Laser angle measuring systems

You can achieve consistently precise angles using the tried-and-tested ACB Wireless and ACB Laser angle measuring systems – without any manual intervention.

6-axis backgauge sensor system

The sensor system on the 4-axis or 6-axis backgauge accurately positions your components.

Lane

You can freely select the length of the floor lane. This ensures there is enough space for blanks and finished parts.

BendMaster

With the BendMaster (60) and BendMaster (150), you always have the right automation solution for every range of parts.

Digital connection and integration for smart solutions

Seamless integration of multiple TRUMPF machines into your own software environment is very easy. We have the right solution for every combination, whether it be integration into Oseon or a connection to monitoring and analysis tools. A connection to third-party software systems is also possible with our interfaces based on the OPC UA standard.

STOPA large-scale storage systems

Maximum efficiency for your production

Standard tools

You can choose between more than 150 upper and lower tool types for your personal range. You can order tools individually or as a set.

Tool with Automatically Controlled Bending

You can achieve consistently precise angles using the tried-and-tested Automatically Controlled Bending angle measuring system – without any manual intervention.

ZN tools

During the processing of galvanized sheets, even after just a few bends, there may be zinc deposits on the die, resulting in cold welding. This causes imprints on the component and imprecision. This can be avoided with the coated LASERdur ZN TRUMPF bending tools. These combine a high level of surface hardness with excellent sliding properties, are corrosion resistant, and do not need to be cleaned.

Special tool

For specific requirements, TRUMPF will develop your own personal tool solution. To guarantee the quality of your parts, we test the tools in advance with your specific material and create initial sample parts.

Be om et tilbud