Om oss

Partnerskap

Arbeidstilsynet

Blogg

|

Ring 48 49 41 94 eller send oss ​​en e-post

Kontakt
TruTool C 250 with chip clipper 18V LiHD battery
TruTool C 250 with chip clipper 18V LiHD battery - Image 2

, ,

TruTool C 250 with chip clipper 18V LiHD battery

The most powerful cordless slitting shears

Be om et tilbud

The most powerful cordless slitting shears

The TruTool C 250 with chip clipper and 18V LiHD rechargeable battery is the first cordless rechargeable slitting shear that cuts sheet thicknesses of 2.5 mm in mild steel and 1.5 mm in stainless steel. The integrated chip clipper enables you to cut off chips at any time with one hand and pull the machine out of the workpiece. Excellent for notching work and interior cut-outs. We provide you with different knives to match the application. The 4.0 Ah / 18V LiHD rechargeable battery also ensures long runtimes.

 

Cordless Alliance System

Cross-manufacturer rechargeable battery system for leading power tool brands. 100% compatibility for over 180 machines in the 18-volt class

Brushless motor

Almost unlimited service life, virtually wear-free and hardly any maintenance required. Battery performance per charge is also increased.

Chip clipper for single-handed operation

Chips can be easily cut with one hand at the touch of a button. Perfect for interior cutouts and notches.

Uniquely powerful

The first slitting shears with rechargeable battery for cutting mild steel up to 2.5 mm and stainless steel up to 1.5 mm.

TruTool C 250 with chip clipper 18V LiHD battery, dimensional drawing

Cordless Alliance System

This product is part of the Cordless Alliance System. CAS means one battery for everything, 100% compatibility for machines, rechargeable battery packs and rechargers – regardless of manufacturer. World's most powerful battery system with 30 years of battery expertise from Metabo. Maximum reliability, clear cost benefits and a sound investment.

Battery technology

LiHD rechargeable battery technology means more power, service life and runtime. It charges reliably using process-controlled charging and discharging management. By cells being protected by minimal temperature build-up and permanent electronic single cell protection (ESCP), even when used over very long periods. The result: high-quality materials and intelligent battery management combined with brushless motors and power-head technology mean longer runtimes. The rechargeable battery pack's outer rubber coating also provides secure and non-slip stability as well as impact protection.

For any application

We offer 5 different cutters: The CR cutter is ideal for processing stainless steel. The curve cutter cuts with excellent contouring. The spiral cutter is ideal for spiral ducts and cuts even sheet thicknesses of up to 0.14 in. quickly. There are two different cutters available for straight cuts: One cutter for processing thin sheets of up to 1.5 mm and one further cutter for use on sheet thicknesses of 1.5 – 2.5 mm.

Technical Data sheet

Receive the technical data of all product versions as a PDF.

Request Technical Data sheet

Flat sheet

For cutting and trimming flat sheets. For radial and interior cutouts, as well as notches.

Profiles

For cutting C-L-U profiles and longitudinal cuts in profile sheets.

Spiral ducts

For cutting spiral ducts. For sheets thicknesses of 4 x 0.9 mm or 6 x 0.6 mm in mild steel, and 4 x 0.6 mm in stainless steel.

Tubes

For cutting tubes.

Corrugated sheet metal

For cutting corrugated sheet metal. For radial and interior cutouts.

Checker plate

For cutting checker plates. For radial and interior cutouts.

Coil processing

For cutting coils. For relief cuts and sampling.
The following consumables and the corresponding accessories are included in the scope of delivery.

Straight cutter (integrated)

0.06 – 0.1 in

Case (TRUMPF Box 165L)

1 unit 2883101

Cutting blades, 2 units

Set of 2 1275275
Find the right consumables and accessories for your machine here.

Cutter SC

Set of 2 1279109
Ideal for spiral ducts up to 4 x 0.035 in.

Cutter plate

1 unit 1267770

Curve cutter

Set of 2 1279145
Good curvability. For sheet thicknesses up to 0.02 – 0.06 in. Left 1.77 in. / right 3.15 in.

Cutter CR

Set of 2 1279142
Ideal for sheet thicknesses 0.02 – 0.06 in.

Straight cutter 0.06 - 0.1 in.

Set of 2 1279105
Ideal for sheet thicknesses 0.06 – 0.1 in.

Straight cutter 0.02 -0.06 in.

Set of 2 1279107
Ideal for sheet thicknesses 0.02 – 0.06 in.

Cutting strip set

Set of 1 1275275
2 units with screws

18V starter kit

1x LG 12V-36V recharger / 2x 18V LiHD 4.0 Ah rechargeable battery 1 Set (DE) 2598816 1 set (GB) 2598820 1 Set (USA) 2598818

LG 12V-36V recharger

For 12V and 18V LiHD rechargeable battery 1 unit (DE/CH) 2569784 1 unit (GB) 2569786 1 unit (USA) 2569785

18V LiHD 4.0Ah rechargeable battery

1 unit 2598811

Torx screwdriver

1 unit 1775531
With T-handle TX20

Power-Head Technology

The light metal gear head's ingenious design is specially adapted to the low voltage battery technology. Decoupling the motor pinion from the motor minimizes energy loss and ensures even higher performance per battery charge.

Brushless motor

The powerful BL motor generates higher torques than conventional motors, requires less power and generates hardly any heat. This has a positive effect on the battery life and lets you get the most out of every battery charge. Additional advantage: The service life of a BL motor is almost unlimited because they work without carbon brushes and therefore no mechanical friction occurs. The result: almost wear-free motors and hardly any maintenance.

Compact and powerful

The 18V rechargeable battery tool has a lightweight design enabling fatigue-free working. The soft grip ensures safe and low-vibration working. All TRUMPF rechargeable battery tools are also available as stand-alone versions, i.e. without rechargeable batteries and recharger. If you already have CAS batteries available, you then have the option to save on resources and cut costs.

Optimal working speed

You can use the speed controller to adjust the working speed to suit the individual cutting task. It is extremely efficient if you work in accordance with the predefined cutting lines or a template. It is also well-suited to frequent processing of radii and stainless steel. The electronic overload protection offers yet another notable benefit.

Er du klar til å jobbe med

TruTool C 250 with chip clipper 18V LiHD battery?

Kontakt oss i dag

Relaterte produkter

,

TruTool F 301

Simple closing of ducts in thin sheet range

Be om et tilbud
Se maskin

,

TruTool TKF 1500

Powerful and safe

Be om et tilbud
Se maskin

,

TruTool N 700

Perfect for dismantling work

Be om et tilbud
Se maskin

Contact us Today