TruTool C 160 12V LiHD rechargeable battery

Battery machine for precise cuts

The 12V battery machine without chip clipper is particularly well-suited to cutting tasks without chip clipping during the cutting process. For example if you are cutting straight sheets to length or for curved cutting. We have different blades available to match the application. The 4.0 Ah / 12V LiHD rechargeable battery also ensures long runtimes.



Machine without chip clipper
For applications where chip clipping is not necessary during the cutting process.
Easy and safe operation
A soft grip ensures a secure hold and enables low-vibration operation.
Ideal for trimming to length
Well-suited for straight, distortion-free cuts and C-L-U profiles.



Charger and rechargeable battery for 10.8 V

Battery technology

LiHD rechargeable battery technology means more power, service life and runtime. It charges reliably using process-controlled charging and discharging management. The cells are protected by minimal temperature build-up and permanent electronic single cell protection (ESCP), even when used over very long periods. The result: high-quality materials and intelligent battery management combined with brushless motors and power-head technology mean longer runtimes. The rechargeable battery pack’s outer rubber coating also provides secure and non-slip stability as well as impact protection.



TruTool C 160, cutter

For any application

We offer 4 different cutters to suit particular applications: The CR cutter is ideal for processing stainless steel. The curve cutter cuts with excellent contouring. There are two different cutters for straight cuts: one cutter for processing thin sheets of up to 0.04 in and one for use on sheet thicknesses of 0.04 – 0.06 in. A quick-release locking bolt enables you to change the cutter quickly and easily without the need for Tools.

Technical data

Scope of delivery

The following consumables and the corresponding accessories are included in the scope of delivery.

TruTool C 160, Messer 1 - 1,6 mm
Straight cutter (integrated)
0.039 - 0.063 in
TruTool C 160, Schneidleistensatz
Cutting strip set, 2 units with screws (integrated)
Set of 2 0927708
Zubehör Standbild
Allen key DIN 911-2.5
1 unit 0067822
TruTool Li-ion rechargeable battery 10.8 V, 2 Ah
12V LiHD 4.0 Ah rechargeable battery (2 units)
1 unti 2598770
TruTool charger 100 - 240 V
12V-36V recharger LG
1 unit, DE/CH version: 2569784
TruTool DD 1010, Gürtel-Clip
Belt clip
1 unit 1886524
1 unit 1763681


Find the right consumables and accessories for your machine here.

TruTool C 160, cutter 0.039 - 0.063 in
Straight cutter 1 - 1.6 mm
Ideal for sheet thicknesses of 0.39 - 0.63 in.
Set of 2 1264343
Set of 5 1264345
TruTool C 160, cutter up to 1 mm
Straight cutter up to 1 mm
Ideal for sheet thicknesses up to 0.4 in.
Set of 2 1264356
Set of 5 1264357
TruTool C 160, cutter CR
Cutter CR
Ideal for stainless steel and spiral ducts
Set of 2 1264346
Set of 5 1264347
TruTool C160, cutter set (straight cutter, curve cutter)
Cutter set
1 x straight cutter 1 mm, 1 x curve cutter
Set of 1 913521
TruTool C 160, cutting strip set
Cutting strip set
2 units with screws
Set of 1 927708
12V LiHD 4.0Ah rechargeable battery
1 unit 2598770
LG 12V-36V recharger
For 12V and 18V LiHD rechargeable battery
1 unit (GB) 2569786
Belt clip
Suitable for the 12V LiHD battery machines
1 unit 2599016
TruTool C 160, parallel stop
Parallel stop
For cutting parallel strips with width of 35 - 300 mm
1 unit 143439
1 unit 1763681

Customer benefits

Power-Head Technology

The light metal gear head's ingenious design is specially adapted to the low voltage battery technology. Decoupling the motor pinion from the motor minimizes energy loss and ensures even higher performance per battery charge.
Image of the technology inside the TRUMPF battery-powered machines

Brushless motor

The powerful BL motor generates higher torques than conventional motors, requires less power and generates hardly any heat. This positively affects battery performance and means you get the maximum from every battery charge. A further advantage is the practically limitless service life of a BL motor due to the absence of carbon brushes and therefore no mechanical wear. This means almost wear-free and maintenance-free motors.
Image of the technology inside the TRUMPF battery-powered machines

Small and handy

The 12V rechargeable battery tool has a lightweight design enabling fatigue-free working. The soft grip ensures safe and low-vibration working. All TRUMPF rechargeable battery tools are also available as stand-alone versions, i.e. without rechargeable batteries and recharger. If you already have CAS batteries available, you then have the option to save on resources and cut costs.
Battery-powered machine, speed control

Optimal working speed

You can use the speed control to adjust the working speed to suit the individual cutting task. This provides a variable cutting speed of up to 29.5 feet per minute. The speed control is highly efficient for work with scribed lines or with a template. It is also well-suited to frequent processing of radii and stainless steel. The electronic overload protection offers yet another notable benefit.