• Vi gjør plateindustriens hverdag enklere!
Ring oss484 94 194

TruBend Center 5030

Semi-automatic panel bender

The TruBend Center 5030 sets the standard when it comes to flexibility during panel bending. Discover what is arguably the widest range of parts in this machinery category with the semi-automatic TruBend Center 5030. Go far beyond traditional panel bending capabilities, process complex workpieces quickly and with flexibility. Produce components for an array of industrial purposes and applications, from delicate shrouds up to large-scale trays.

Technical data

Equipment

ACB laserACB laser

ACB laser is an optical bending angle correction system that operates without contact: A laser projects a line onto the sheet, and a camera then detects the angle.

3-surface suction module

Different gripper modules

The 3-surface suction module positions the sheet using suction cups on the front face, top, and bottom. If there is an insufficient suction area, magnetic or gripper modules take on this task.

Magnetic or gripper module

Magnetic/gripper module

For components with an insufficient suction area, other gripper systems take over sheet positioning. For these generally smaller components, so-called magnetic or gripper modules are used.

Tools

TruBend Center Series 5000, extra blank holder

Extra blank holder tool (ENW)

With additional upper blank holders, you can also produce very narrow profiles or components with formed sections near the bending lines. If required, the machine automatically swivels in the ENW extra blank holder from above. The available standard blank holders do not need to be replaced or modified for this.

TruBend Center Series 5000, extra bending tool
Extra bending tool (ZBW)

Extra bending tools can be set up automatically in order to bend flanges or offset bends. When necessary, the tools automatically move to the correct position from their parked position, and process the sheet without using the remaining bending tools.

TruBend Center Series 5000, horn blank holder
Horn blank holder

Nestings with inner edges can be produced easily with the horn blank holders. The “horns” extend and retract automatically at an angle. This means that the upper blank holder can move downwards without causing a collision between the tool and the bend.

Video

Send forespørsel